jotron 103660, Руководство оператора и инструкция по установке

Страница: 58 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 58 of 104
8.3.3.1 Ethernet/transponder connector
The cable between transponder and display is described in chapter 8.2.3.
The “Ethernet” interface is auto detecting RX and TX similar as a network switch.
No need to consider if the cable is crossed or not.
8.3.3.2 Power connector
# In/Out Type Usage Name
1
Out/In
Ethernet
(UDP)
100Base-T
Transponder
connection
TX+ / RX+
2
Out/In TX- / RX-
3
In/Out RX+ / TX+
4
- -
5
- -
6
In/Out RX- / TX-
7
- -
8
- -
Table 3 Transponder connector (RJ45) pinout
# Name Colour
1
MAIN, 12 - 24 VDC Green
2
GND (Chassis) Shield
3
BACKUP, 12 - 24 VDC Yellow
4
BACKUP, 0 VDC
Brown
(common with 5)
5
MAIN, 0 VDC
Brown
(common with 4)
6
Do Not connect
Table 4 Power connector (86851) pinout
Figure 8-27 Part no.: 86581, Power cable, Display Unit
Figure 8-26 Ethernet RJ45 connector