jotron 103660, Руководство оператора и инструкция по установке

Страница: 53 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 53 of 104
8.3.2.6 Pilot / External Display connection
On some vessels there might be mandatory to have a pilot port
plug. A Pilot plug with cable can be bought from your Jotron
dealer. The pilot port cable can be either conneted to the
Transponder or the Display. For connection to the Dispaly, see
chapters 8.3.3.
A detailed description of the pilot plug can be found in chapter
8.3.3.3
If the Pilot plug is not connected to the Transponder, the port can be used as a External Display 4.
Default speed on this port is 38400 baud.
Pilot Port connection on Transponder: Pilot Port connection on Display:
Pilot Port socket connection:
# In /
Out Type
Usage Name
Connects to
AMP 206486-1
Pin no:
16
In
IEC61162-2
(RS422)
Pilot /
Ext. Display 4
RD4-B(+) 6
17
RD4-GND (Iso Gnd) 9
18
In RD4-A(-) 5
19
Out TD4-A(-) 1
20
TD4-GND (Iso Gnd)
21
Out TD4-B(+) 4
Figure 8-23 AMP 206486-1
(Pilot Socket) pinout
Figure 8-18 Pilot plug with cable
Figure 8-19 Pilot port connection, TR-8000 Transponder
unit (if not used as External Display 4)
Figure 8-20 Pilot port connection, TR-8000
Display unit (rear)
Figure 8-22 Pilot port cable, Display unit
Figure 8-21 Pilot port cable, Transponder unit