R5 SUPREME AIS Operator Short
Instruction
7000 118-364 A1
This quick user guide serves as a complement to the
standard manual with P/N: 7000 118-300 found on the
documentation CD. This guide is designed to give
immediate access to essential information when operating
the system on a daily basis.
Please visit our web-site for the latest news regarding this
and other ship borne products. Our web-site also contains
contact information to our dealers and service stations
world-wide and much more.
www.saabgroup.com/transpondertech
Saab TransponderTech AB
R
5
S
U
P
R
E
M
E
A
I
S
SYSTEM MODES
Important:
The R5 SUPREME AIS Transponder
System can be set up to operate in different system
modes,
AIS, Navigation or a Combined AIS and
Navigation mode.
This short instruction deals with AIS functions only. If
Navigation system functions are activated, additional
symbols and menus will be available.
GENERAL OPERATION
SYSTEM NAVIGATION
The R5 SUPREME CDU is equipped with a resistive touch screen
as well as a keypad to be used for operation of the system. When
using the
Arrow keys
to navigate the system views, selected
items will be highlighted by an orange frame. Press
ENTER
to
open a view. Press to go back.
CHANGING PARAMETERS
Many views contain parameters that can be edited. To edit a parameter,
press the parameter value or select it by using the
ARROW KEYPAD
and press
ENTER
.
Changes will not take effect immediately. Press
Save
on screen button
after editing parameters to save and exit the view. Press
Back
on screen
button to cancel changes.
Data can be entered to the system in the following ways:
1.
Text / Numbers
: A virtual keyboard/keypad will popup when
editing text or number fields. Press characters on screen directly,
or use
Arrow keys
to highlight and press
ENTER
key to input a
character. Press
VIRTUAL KEYPAD ENTER
key
to accept new
input after editing. Press
ESC
to undo changes.
2.
Selection List:
Parameters with fixed values are displayed in a
drop-down list, shown when the parameter value is pressed.
Select one of the listed values.
3.
Selection List and numeric input:
In views like the
Send AIS Message
it is possible to select a
target MMSI in a list of predefined values based on received
targets MMSI. It is also possible to enter any MMSI number. To
do this, select the
Numerical Input
choice and input a numerical
value using the virtual numerical keypad shown.
DO NOT TURN OFF TRANSPONDER POWER WITHIN 2 SECONDS
OF A PARAMETER CHANGE!
