Jonsered FR 13, Руководство по ремонту

Страница: 27 / 68

English –
25
9
10
6012-002
6012-001
1
2
3
8009-282
1
2
Repair Instructions
Screw the cable from the starter to the start relay
into place.
Lift the battery into position and attach the cable
connectors and cover, tighten the fastening strap.
WARNING!
Petrol is highly flammable and
harmful to the environment.
Exercise caution to avoid fire and
spillage.
Fuel Tank
Removal
Place a suitable container to collect the petrol. The
tank holds about 7 litres.
Empty the petrol tank by removing the hose from
the connector under the tank.
If you do not wish to empty the tank, you can pinch
the hose with lockable welding pliers and then
remove the hose and hose clamp from the fuel
filter’s lower connector. You must then be sure to
keep the hose opening higher than the fuel level in
the tank.
Remove the two screws that hold the tank on the
console. Lower the tank and pull out the hose
through the frame of the machine (if it has been
loosened at the fuel filter).
Fitting
It is easier to work if you empty the tank before
assembly. Pull the tube into place, pull it under the
corner of the crank house, and attach it to the fuel
filter with the hose clamp. Make sure that the hose
cannot be chafed or rubbed.
Place the tank in place in the console and attach it
with the two screws.
3
Fit the fuel hose and the hose clamp to the connec-
tor under the tank as required. Fill with petrol and
check that there are no leaks.