36
10. How cleaning the Fume Inspection Porthole
Open the closing porthole of the exchange fan. (
F
ig
. 29
and
30
).
Loosen the locking knobs (
F
ig
. 31
) of the fume inspection door
and remove the cap.
Clean deep the residual ashes stacked on the exchanger bottom
inside the inspection compartment by handling the ashes aspirator
nozzle (
F
ig
. 33
).
Take care to apply again the red silicon seal tightly (
F
ig
. 34
) when
closing the inspection tap.
Put on the tap again and strengthen tight the locking knocks. (
F
ig
.
35
)
11. How making the reset of the safety Thermostat (see also
CHAP. 07.5)
Loosen the red tap located under the side panel on the right. (
F
ig
.
36
).
Press down the white button (
F
ig
. 37
) until you hear the safety
reset “CLICK”.
Screw again the black tap.
12. How connecting the power plug
Before connecting the cable plug supplied with the stove to the
house power network, insert first the plug to the socket fitted
under the side panel on the right (
F
ig
. 38
) by passing it through
the slot at the stove rear.
After inserting the plug into the power socket, press the switch
O – I on pos. “
I
” (
F
ig
. 39
).
F
ig
. 36
F
ig
. 37
F
ig
. 38
F
ig
. 39
F
ig
. 31
F
ig
. 32
F
ig
. 29
F
ig
. 30
F
ig
. 33
F
ig
. 34
F
ig
. 35
Содержание I-DEA Angolo
Страница 42: ...42 NOTES...
Страница 43: ...43...
