Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 44

29
1
2 3 4 6
1
3 4 6
Menu 06
XXX = SET
YYY = DISPLAY
User interface settings.
DISPLAY SETTINGS:
1. button 4
2. press button 6 to reach the SET DISPLAY page, press button
4 to confirm
3. press button 1 or 2 to enable or disable the buzzer on the SET
BUZZER page, press button 4 to go to the next page
Menu 07
XXX = LOAD
YYY = PELLET
Manual enabling for PELLET loading and to fill the load auger
LOAD PELLET SETTINGS:
1. button 4
2. press button 6 to reach the LOAD PELLET page, press button
4 to confirm
3. press button 1 to enable the load process on the INITIAL LOAD
page
4. on the DELAY DISPLAY page, press button 1 or 2 to change the switch off delay value for the LCD display backlit function, press
button 4 to confirm
5. press button 3 to exit, press repeatedly to return to the home page
4. press button 3 to suspend or wait for the load phase to be completed
5. press button 3 to exit, press repeatedly to return to the home page
6. on reaching the home page the CLEAN BASKET message will pop up. Press and hold button 3 for 2” to cancel the message.
INITIAL LOAD: loading must be performed if the auger is empty, after a NO PELLET alarm, or after maintenance or cleaning of the
container. Every time the manual PELLET load mode is enabled, the crucible MUST be emptied to create the correct conditions for the
stove start-up phase.
5
3 4 6
Menu 08
XXX = STATE
YYY = STOVE
Menu 8 consists of various pages that display information on
the stove conditions.
VIEWING STOVE STATUS:
1. button 4, press button 6 to reach the STATE STOVE page,
press button 4 to confirm.
2. the first page displays:
a. fume temperature, first row
b. fume fan speed and output level, second row
c. pellet load time, third row
d. phase in progress, fourth row
3. press button 6 to change page
4. information for the assistance technician is provided from page 2 to page 6. Press button 5 to go to page 7.
a. Displays the ambient temperature of the right ducting
5. press button 5 to go forward
a. D isplays the ambient temperature of the left ducting
6. information for the assistance technician is provided from page 9 to page 11.
7. p ress button 3 to exit, press repeatedly to return to the home page.
Menu 09
XXX = TECHNIC
YYY = SETTINGS
Menu with access key, reserved for use by the Assistance Tech-
nician only.
Menu 06
XXX
YYY
Menu 07
XXX
YYY
Menu 08
XXX
YYY