Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 44

7
CHAP.03 HANDLING AND TRANSPORT
The machine is delivered on a pallet, packed with a cellophane
hood; when receiving merchandise, check that:
• all packaging is intact
• all of the merchandise indicated on the delivery bill has actually
been delivered.
• the supply corresponds to the order specifications; if the packa -
ging is damaged, check the condition of the contents as any bre-
akages should be reported immediately to the carrier and retailer.
• check there is no damage to any supplied elements; if there is
any breakage detected, report to the carrier and retailer as soon
as possible.
If any material listed on the bill of lading is missing, inform the
retailer immediately.
DANGER OF CRUSHING, COLLISION AND
ABRASIONS.
Personnel in charge of handling the product must have read and
thoroughly understood the safety prescriptions in CHAP.02 of this
manual and must wear work gloves and safety footwear.
For safety reasons, unauthorised persons must not be in the
area while the product is being moved.
The product must be moved only with a trolley or pallet fork, and
never with belts, chains, overhead cranes (see CHAP.05 - TECH-
NICAL DATA for the weight). All parts of the packaging coming into
contact with the crane, belts or straps must be protected. Unless
there are obstacles, lift the product to a maximum of 30 cm from
the ground and move it slowly, avoiding jerky or brusque move -
ments.
WARNING: Danger of suffocation.
Make sure that children do not come into contact with packaging
materials, plastic film or polystyrene as this could cause suffoca -
tion.
WARNING: Danger of environmental pollution.
Adopt positive civic behaviour and
DO NOT
disperse the packa-
ging into the environment, but take it to waste disposal centres
for recycling. All packaging can be RECYCLED, as it consists of
wood, polyethylene film, polystyrene and cardboard.
03.1 RECEIVING GOODS
03.2 LIFTING AND TRANSPORT