Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 44

28
1
2 3
4
6
1
2 3
4 6
Menu 03
XXX = SET
YYY = LANGUAGE
Setting the desired language.
SETTING THE LANGUAGE:
1. button 4
2. press button 6 to reach the SET LANGUAGE page, press but-
ton
3. 4 to confirm
4. press button 1 or 2 to change the language, press button 4 to
confirm
5. press button 3 to exit, press repeatedly to reach the home page
Menu 04
XXX = SET
YYY = PROBE
Setting the ambient probe type. There are two types of probes
available: analog temperature reading probe or on-off contact
probe.
PROBE SETTINGS:
1. button 4
2. press button 6 to reach the SET PROBE page, press button 4 to
confirm
3. press button 1 or 2 to change the year, press button 4 to confirm
4. press button 3 to exit, press repeatedly to reach the home page
WARNING:
if a thermostat is used, the contact connected to the electrical terminal board must be CLEAN
Menu 05
XXX = SET
YYY = STAND-BY
STAND-BY mode settings. The STD-BY mode allows you to
switch off the stove if the ambient temperature conditions are
within the values set in this section.
1
2 3 4 6
STD-BY SETTINGS:
1. button 4
2. press button 6 to reach the SET STAND-BY page, press button 4 to confirm
3. press button 1 or 2 to enable or disable the function changing the message to ON or OFF, press button 4 to confirm
4. press button 1 or 2 to change the OFF delta temperature value, press button 4 to confirm
5. press button 1 or 2 to change the off delay value, press button 4 to confirm
6. press button 3 to exit, press repeatedly to return to the home page.
How does the STAND-BY mode work?
The STD-BY allows the stove to be switched off when it reaches the temperature value set in section 4. The OFF Delta, is the tempera-
ture differential between the SET ambient temperature and the actual ambient temperature. Therefore if, for instance, the SET ambient
temperature is 19°C, with an OFF Delta of 2°C and a switch-off delay of 5’, when the ambient temperature remains above 21°C for at least
5 minutes, the stove will switch off. It will remain in STD-BY until the ambient temperature reaches -1°C of the SET ambient temperature
which will trigger automatic start-up of the stove.
It is recommended to enable the STD-BY function only if the ambient conditions are favourable; excessive start-ups and switch offs during
the day reduces the performance of the stove and leads to wasting of energy.
Menu 04
XXX
YYY
Menu 03
XXX
YYY
Menu 05
XXX
YYY