20
06.6
ELECTRIC CONNECTIONS
Electrical connections must be carried out by skilled per-
sonnel according to the regulations in force (2014/30/UE and
2014/35/UE).
Connect the 230Vac 50Hz line with the proper cable with plug,
supplied with the stove, which powers up the control unit and all
the stove’s electrical components.
To achieve this, open the right side panel (
A
), rotating it to the
right, to access the power socket and thread the cable through
the slot (
B
) at the back.
The stove is fitted with a current socket with fuse (
C
), a spare
fuse in the drawer (
D
) and a general bipolar mains switch (
E
)
(see fig. to the side) so, in the event that the control unit does not
switch on, even after turning the switch to
I
“ONE”, check that the
fuse has not blown.
1
Control unit manual
2
Earth
3
Power socket with cord included
4
Switch
5
Fuse ø5x20 F4A 250V IEC 127-II
06.7
ELECTRONIC CONTROL UNIT
A complete description of the functions is provided
below.
The control unit manages all the stove functions and is
controlled via the
LCD display
(see
CHAP.07.3
); it can
also be controlled via an
IR remote control
(
CHAP.07.4
).
The electronic control unit features a timer function with
customisable programmes and user-friendly operating
settings. The functions are controlled by the
AMBIENT
PROBE
, fitted on the back of the stove, but it can also
be extended to a different position in the installation room
which is more appropriate for reading the correct ambient
temperature.
The electric/electronic elements also include certain sa-
fety systems:
FUME TEMPERATURE PROBE:
fitted inside the fume exhaust fan.
PRESSURE SWITCH:
fitted inside the fume exhaust fan.
PELLET HOPPER SAFETY THERMOSTAT:
fitted inside the PELLET container, it intervenes in situa
-
tions where the
temperature inside the stove is too high.
The Control Display allows you to perform the fol-
lowing main functions:
•
Start up or turn off the stove.
•
Select from 5 different heating output levels.
•
Set the desired ambient temperature.
•
Optimise combustion.
•
Manually load pellets into the basket.
•
Use the timer system to programme the start up cycles.
•
Report any function irregularities.
• Indicate the heating stove’s operating mode.
A
B
D
C
E
1
2
3
4
5
N
F
N
L
5
Содержание I-DEA Angolo
Страница 42: ...42 NOTES...
Страница 43: ...43...
