Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 44

11
The technical data provided in the table are certified laboratory tested values, in accordance with the test methods
endorsed by European Standard EN 14785:2006.
The declared output may vary according to fuel type.
Recommended fuels:
PELLETS: See Pellet characteristics indicated in CHAP. 05.2 on the following page. All stove tests, final inspection and fine-
tuning was performed using the recommended certified pellets.
JOLLY MEC CAMINETTI SPA is not responsible for malfunctions, breakdowns or problems due to the use of pellets that are
not recommended, as combustion parameters vary according to the quality of the pellets. To achieve best operational results,
it may be necessary to change the default factory settings on the control unit during the “first start-up” commissioning phase.
These operations must only be performed by the relative Technical Assistance Centre (TAC), being the only operators autho-
rised to complete the first start-up activities.
Use of any type of liquid fuel is forbidden.
These or similar materials may be: dangerous for the user, damage the fireplace, the fume exhaust union, the flue
and pollute nature.
05.1 HOMOLOGATION EN 14785:2006
CHAP.05 TECHNICAL DATA
Description 9 kW 11 kW
M.U.
353
Nominal burning output Q
tot
9,40 12,15 kW
366
Nominal heat output P 9,00 11,00 kW
362
Reduced heat output
P
2,40 3,00 kW
302
Nominal output consumption B
t
2,00 2,60 kg/h
304
Reduced output consumption B
t
0,50 0,60 kg/h
357
Maximum output dispersed into the environment P
sh
9,00 11,00 kW
000
Reduced output dispersed into the environment P
sh
2,40 3,00 kW
053
Nominal output efficiency η 91,00 90,50 %
601
Rated voltage/frequency 230/50 230/50 V/Hz
602
Electrical absorption min(at full capacity) - max(during start-up) 156-320 156-320 W
253
Total weight 125 125 kg
401
Standard hopper capacity 30 30 kg
702
Flue draught required From - To
10-14
10-14 Pa
653
Fume exhaust diam.
80 80 mm
106
Average fume T t
a
139,00
154,00 °C
003
CO (13% O
2
) nominal output
0,020
0,012 %
000
CO (13% O
2
) reduced output 0,046 0,033 %
006
CO
2
10,00 11,00 %
000
Dusts (13% O
2
) nominal output 8,00 11,00 mg/m
3
203
Nominal fume mass output m 6,70 8,40 g/s
000
Reduced fume mass output m 2,70 3,40 g/s
701
Inflammable materials distance (see CHAP.06) 200 to 800 200 to 800 mm
654
Comburent air pipe diameter 50 50 mm