background image

3

•  Familiarity and compliance with the instructions given in this manual will ensure quick installation and correct use of the 

appliance.

•  Read the manual attentively before commencing installation, and be certain to follow the directions it contains, 

otherwise 

the warranty could be invalidated and the performance and safety of the appliance jeopardized.

•  The installation manual is an integral part of the product and must be given to the user.

•  It must be kept in a safe place and consulted carefully, as all of the warnings provide important information on safety 

during installation, use and maintenance.

•  Incorrect installation of the stove could cause damage and injury to people or animals, for which the manufacture cannot 

be held liable.

•  Installation shall be performed by qualified operators in accordance with the regulations in force in the Country of instal-

lation.

•  The appliance must be used only for its intended purpose. Any other use is deemed improper and therefore dangerous.

•  The manufacturer declines any contractual or non-contractual liability for damages caused by errors in installation or use 

of the appliance or failure to follow the instructions contained in this manual.

•  All rights on the reproduction of this technical manual are owned by JOLLY-MEC CAMINETTI S.p.A. 

•  The descriptions and illustrations provided in the following publication are not binding.

•  JOLLY-MEC CAMINETTI S.p.A. reserves the right to make any modifications that may be deemed appropriate.

•  This manual cannot be given to third parties for perusal without the written permission of JOLLY-MEC CAMINETTI S.p.A.

•  The technical directions for installation contained in this manual should be considered as basic requirements. Regulations 

in some countries may be more restrictive; in this instance, comply fully with the regulations prevailing in the country of 
installation 

(all laws and local bylaws must be observed when installing and using the appliance, including those 

referring to national and European standards).

•  Never use the appliance as an incinerator, or in way other than that for which it was designed. 

•  Do not use fuels that are not recommended. 

•  Do not use liquid fuels.

•  When the appliance is running, the glass and other visible parts reach extremely hot temperatures to the touch; handle 

with extreme care to avoid burns.

•  Do not make any unauthorised modification to the appliance.

•  Use only original spare parts recommended by the manufacturer.

•  Acceptance of the machine by the user must be “total”, including the sound level of operation, comparable to an electrical 

appliance. Complaints for characteristics not indicated in this manual shall not be accepted.

IMPORTANT

01.2  

WARNINGS

Содержание I-DEA Angolo













































Отзывы: