Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 44

17
06.1 SETTING UP OF EXTERNAL AIR INTAKES AND ELECTRIC CURRENT
CHAP.06 POSITIONING AND CONNECTIONS FOR THE INSTALLER
Electrical connections must be carried out by skilled personnel
according to the regulations in force (2014/30/UE and 2014/35/UE).
The appliance must only be installed on surfaces that can support
the load. If the existing construction does not meet this requirement,
it will be necessary to take appropriate measures (e.g. installing a
load distribution plate). The appliance must be installed in an area
where the appliance itself, gas exhaust pipes and flue can be easily
accessed for cleaning.
The minimum distances to be maintained are shown in the tech-
nical drawings.
The lateral distance from the adjacent wall, according to installation,
is to be maintained on both sides.
All measurements are in mm
1. Fume exhaust
2. Electric socket to be positioned 1250 mm max from the stove’s
centre line
3. Stove centre line
4. External air intake ø50
5. Ducted air intake ø80 (optional)
Safety distance from inflammable material
-Air distance from inflammable side wall L=200 mm
-Air distance from inflammable rear wall B=200 mm
-Frontal air distance from inflammable material R=800 mm
NOTE!
The external air inlets must be positioned where they can not be
accidentally blocked.
I-DEA Quadra/Frontale
1
5
2
4
430
262
499
1022,5
93
77
3
70
68
2
4
1
L
B
R
2
3
4
499
430
77
70
4
1
2
B
I-DEA Angolo
1
5
1022,5
262 93
68
L
R