Jolly Mec I-DEA Angolo, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 44

12
05.2 PELLET QUALITY
PELLET QUALITY IS VERY IMPORTANT; PLEASE READ THE FOLLOWING PAGE CAREFULLY.
Automatic pellet loading products are heating systems designed to burn wooden PELLETS . It is important to choose pellets
that have no debris or impurities. The Association of Pellet Manufacturers with the Italian Thermotechnical Committee have
established standards for identifying pellets in terms of energy * .
A PELLET product’s performance is significantly linked and highly influenced by the type and quality of wooden
PELLETS that is burned. As the efficiencies of different wooden PELLETS qualities differ, likewise the efficiency and
heat capacity emitted by the product running on pellets will vary. Similarly, the level of unburned residue left inside
the combustion chamber depends on the quality of the PELLETS: the lower the quality of the pellets used, the faster
the dirt residue will build-up.
JOLLY-MEC CAMINETTI SPA strongly recommends the use of the same type of pellets used during first start-up, i.e. when the settings
and calibrations were made to suit the loaded combustible materials. Continuous switching of types and qualities of combustible materials
will require continuous adjustments to settings by the Technical Assistance Centre, which can not be endorsed by the Manufacturer.
MAIN FEATURES:
The main quality certifications for PELLETS on the European market are DIN Plus,
Ö-Norm M7135 and UNI EN ISO 17225-2
(class A1
or A2), which guarantee conformity with the following values:
Powder 1% maximum through a 3.2 mm screen
Apparent density 680 Kg/m
3
minimum
Dimensions 6 mm diameter from 25 to 30 mm of maximum length
Ash content 1% maximum
Humidity 8% maximum
Heating power 4,9 kWh/Kg
Packaging in eco-compatible or biodegradable material sacks
Store pellets at least 1 m from the stove/fireplace. Do not use pellets that are very hard and with different dimensions; the mechanical
parts are sized and tested for use with pellets with the above-mentioned characteristics.
No breakdown or malfunction depending on the quality of the pellets used and/or by the dosage of the quantity will be covered
by the warranty.
WHAT YOU SHOULD KNOW ABOUT PELLETS:
PELLETS are obtained by a drawing process using sawdust discarded by virgin wood processing systems and therefore have
no chemical additives. The consistency, compactness and strength with which the pieces remain intact is due to a substance
contained in wood called lignin; this acts as a binder during the compression phase.
The various qualities of combustible materials can also depend on the sawdust mix used to produce the PELLETS, which
generally have a standard length of between 5 and 30 mm, a diameter of between 5 and 6 mm, a weight of from 600 to 700 Kg/m
3
and
a humidity of no more than 8% of its weight.
One advantage over wood is its greater heating power; in fact, when using good quality wood, it is possible to achieve about 4.3kWh/Kg
with a humidity rate of up to 15%, whilst with PELLETS this can climb to 4.9kWh/Kg and a water content of a maximum of 8%.
The sacks of PELLETS must be stored in a clean, dry place.
*CERTIFIED PELLET CHARACTERISTICS