John Bean QUADRIGA 1000, Руководство оператора

Страница: 96 / 132

96
6.0-1
6.0-2
4
3
5
1
2
6
7
max
min
Operator’s Manual
Maintenance
6.0 Maintenance
This tir e demount unit will continue to provide maximum
working effi ciency even after a long period of intensive
use as long as the operator carries out scheduled
maintenance as indicated below.
W A R N I N G : B E F O R E AT T E M P I N G A N Y
MAINTENANCE OR REPAIRS THE MACHINE MUST
BE DISCONNECTED FROM THE ELECTRICAL
POWER SUPPLY AND THE COMPRESSED AIR
FEED LINE.
Every 6 months
Arrange for the following to be carried out
•
Check the various parts listed below for
excessive play and adjust if necessary (Call the
technical service center):
Figure 6.0-1
1) Wheel support.
2) Vertical activation bar on tools
3) Tool unit slide guides
4) Bead-breaker vertical slide guide
5) Lifter unit slide guides.
Every 4 months
carry out:
• Removal of accumulated dirt with non-fl ammable
liquid detergent.
• Restoration, using a brush, of a suitable quantity of
oil for mechanical lubrication.
on the parts:
Figure 6.0-1
3) Tool unit slide guides
4) Bead-breaker vertical slide guide
5) Lifter unit slide guides
6) Automatic tool mobile parts and arms.
7) Bead pusher tool extraction rod.
• Check hydraulic oil level (
Fig.6.0-2 ).
Note : Perform the check with all hydraulic cylinders
closed.
To achieve this condition, position the parts as
indicated below:
- Bead breaking arms; touching in the central position
- Wheel clamping bar; right down.
If necessary add:
ESSO : Nuto H 46
SHELL : Tellus oil 46
TOTAL : Azolla 46
or equivalents.
Maintain a level close to “max”.
Oil change is not required.
Every 2 months
QUADRIGA 1000/BB