JLG 1230ES, Руководство по обслуживанию и ремонту

Страница: 124 / 204

SECTION 7 - JLG CONTROL SYSTEM
7-2 – JLG Lift – 3121222
When a top level menu is selected, a new set of menu
items may be offered;
If for example you choose Personalities:
DRIVE
LIFT
STEER
GROUND
Pressing ENTER with any of the above displayed menus,
will display additional sub-menus within the selected
menu. In some cases the next level is the parameter or
information to be changed. Refer to the flow chart for
what menus are available within the top level menus. You
may only view the personality settings for selected menus
while in access level 2. Remember, you may always cancel
a selected menu item by pressing the
ESC key.
Changing the Access Level of the Hand Held
Analyzer:
When the analyzer is first connected, you will be in access
level 2 which enables you to only view most configuration
settings which cannot be changed until you enter a pass-
word to advance to a lower level. This ensures that a set-
ting cannot be accidentally altered. To change the access
level, the correct password must be entered. To enter the
password, scroll to the
ACCESS LEVEL menu.
For example:
MENU:
ACCESS LEVEL 2
Press ENTER to select the ACCESS LEVEL menu.
Using the UP or DOWN arrow keys, enter the first digit of
the password, 3.
Then using the RIGHT arrow key, position the cursor to
the right one space to enter the second digit of the pass-
word.
Use the UP or DOWN arrow key to enter the second digit
of the password which is 3.
Repeat this process until you have entered all five digits of
the password which is
33271 .
Once the correct password is displayed, press ENTER . The
access level should display the following, if the password
was entered correctly:
MENU:
ACCESS LEVEL 1
Repeat the above steps if the correct access level is not
displayed or you can not adjust the personality settings:
MENU:
ACCESS LEVEL 2
MENU:
ACCESS LEVEL 1