Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 5 / 44

5
OS1 Mobile Operating Chair
Operating / Service Manual
SAFETY
2. Safety
The main objective of the safety instructions is to prevent injury to persons. In addition, observation of the
safety instructions helps to avoid material damage. As the operator you have purchased an OS1 Mobile Op-
erating Chair from JEDMED. As a result, you are also responsible for its proper and intended operation.
2.1 Signal Words
In order to point out dangers, prohibitions and important information, the following signal words and symbols
are used in this manual. These must be read and strictly observed.
DANGER This signal word indicates an imminent danger resulting in serious injuries, and in some cases
death .
WARNING This signal word indicates a potential imminent danger , which can result in serious injuries, and in
some cases death .
CAUTION
This signal word indicates a
potential imminent danger
, which can result in
light
to
serious injuries
.
NOTE This signal word indicates a potential imminent danger , which can result in damage to property and
the environment
.
TIP Indicates tips for use or other particularly important information when handling the chair.
2.2 Device Safety
JEDMED Chairs were built in accordance with the applicable national and international standards and reg-
ulations according to the current state of the art and tested by an independent body. This chair meets the
requirements for safety and functionality.
The validity of the declaration of conformity expires if changes are made to the chair by the customer or third
parties, e.g. modifications of any kind, use of external accessories, changes to the software, removal of warn -
ing and information signs (no claim to completeness).
Due to the chosen robust, interference-proof design of the electrical adjustment devices, the chair is largely
tolerant to EMC interference from other electrical equipment operated in the vicinity.
Despite comprehensive EMC testing, it is possible that other devices may be disturbed by the chair. In such
cases, either switch off the chair completely by removing the battery or unplugging the mains plug or dis -
connect it from the mains, or, if necessary, keep a larger distance from the disturbed device and change the
orientation to each other. If possible, do not use the same outlet.
This applies in particular to the simultaneous use of highly sensitive measuring instruments. Their measure-
ment reseults may be influenced under certain circumstances.
The chair can be equipped with accessories on delivery (See Accessories).
If necessary, observe the instruction manual for the accessories. For further information, please contact your
authorized specialist distributor.
All prohibition, warning, and message symbols or instructions on the chair must be observed. The symbols
and notes must always be legible and complete. Damaged or lost symbols or notes must be replaced true to
the original.
The chair is made mainly of steel tubes or steel profiles. The surfaces are either powder-coated with zinc or
chrome.
All surfaces are harmless against skin contact.