manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 22 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 22

OS1 Mobile Operating Chair

Operating / Service Manual

 

22

OPERATION CONTINUED

4.5  Changing the battery

The chair cannot be operated without a battery.  Due to the mobility requirements for the OS1 Mobile Operating 

Chair, a stand-alone power supply via the charger unit [COBO] is not possible.  The chair is always and exclusively 

powered by the battery.  The charger unit [COBO] continuously recharges the battery when the  mains plug is plugged 

in (see Charging the battery).

Removing and reinserting the battery

Fold up the cover (1).  Remove the quick-change battery (2).  To do this, pull up the snap lock (3) integrated on the 

right side of the battery with your fingertips.  The battery must snap in with a clearly audible noise when reinstalled 

(see Replacement of battery).

Folding down the cover

Fold down the cover after changing the battery.  Make sure to hold on to the cover when lowering.  Do not let the 

cover fall freely, and snap in under slight pressure.  Check the function of the foot switch for shock position (Tren-

delenburg position) (see Foot switch).

1. Cover

2. Quick-change battery

3. Snap lock

 3

 2

 2

 1

Содержание api OS1













































Отзывы:

Нет отзывов