Jedmed api OS1 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 44

Jedmed api OS1 Скачать руководство пользователя страница 14

OS1 Mobile Operating Chair

Operating / Service Manual

14

OPERATION CONTINUED

4.3.1 Unlocking and Locking the Hand Control

The unlocking and locking of the hand control of an OS1 Mobile Operating Chair is shown here. Locking the hand

control prevents the chair from moving accidentally or unintentionally.

TIP

After removing the quick-change battery [BATTERY] and then reinserting it, the chair remains in

the previous operating status. This means, for example, that the hand control was locked before

disconnecting the battery supply, so the hand control remains locked even after the battery supply

has been restored. The control unit remembers the current operating status even without a

quick-change battery. Depending on the charging status of the quick-change battery,

the control unit changes to stand-by either after 120 minutes (charging status > 40%)

or 10 minutes (charging status < 40%). The corresponding operation control LED and the battery

indicator on the hand control switch (see Battery indicator) turns off. A chair in stand-by mode cannot

be activated by the magnetic key. Press any button on the hand control to activate. Now the chair

can be unlocked or locked.

Operating statuses

• When the chair is equipped with a quick-change battery and the hand control is disabled,

the yellow operation control LED (1) lights up.

• When the chair is equipped with a battery and the hand control is enabled with the magnetic key, the

green operation control LED (2) lights up to indicate that the chair is ready for operation.

5

2

3

4

1

1. Yellow operating control LED (hand control locked)

2. Green operating control LED (hand control unlocked)

3. Hand control

4. Magnetic key

5. Key symbol

Unlocking the hand control

To unlock the hand control (3), swipe the magnetic key (4) over the key symbol (5)

Locking the hand control

To lock the hand control, swipe the magnetic key over the key symbol again

TIP

When the hand control is locked, the foot switch for moving to the shock position (Trendelenburg position)

is also locked (see Foot switch).

«
...
12
13
14
15
16
...
»

Содержание api OS1













































Отзывы:

Нет отзывов