Jedmed api OS1 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 44

Jedmed api OS1 Скачать руководство пользователя страница 16

OS1 Mobile Operating Chair

Operating / Service Manual

16

OPERATION CONTINUED

4.3.3 Relax position

Pressing the two seat inclination adjustment buttons (15) simultaneously brings the chair to a comfortable reclining

position for the patient. Pressing the button for the relax position requires increased attention from the user, as

different actuators are activated simultaneously. All lying surfaces (backrest, seat surface, and leg section) move

simultaneously to the fixed position at maximum speed.

• The backrest lowers slightly

• The seat surface is slightly raised

• The leg section swivels upwards by a predetermined amount

• Careless handling can endanger the patient and third parties or lead to damage to objects or the chair

TIP

The seat height remains in the exisiting position

The position is permanently stored in the control unit and cannot be changed

15

15. Relax position: seat inclination - up+down

«
...
14
15
16
17
18
...
»

Содержание api OS1













































Отзывы:

Нет отзывов