manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 20 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 20

OS1 Mobile Operating Chair

Operating / Service Manual

 

20

OPERATION CONTINUED

4.4  Charging the battery

Notes on handling the battery

TIP

 

Charge the battery for at least 24 hours before first use.  The battery is then available for normal operation

without restriction.  It is not possible to overcharge the battery.  The chair can be adjusted during the charging

 process.

NOTE

  Proper handling increases the service life of the battery.  Avoid deep discharge of the battery.  Deeply 

discharged batteries can be damaged to such an extent that premature replacement is necessary.  In 

order to guarantee the electrical functionality at all times or the longest battery life, the battery should be

charged < 30% or replaced with a fully charged battery (see Battery indicator).  Fully charged batteries

should not be stored for longer than 3 months without recharging.  The battery must be fully charged or

replaced with a fully charged  battery every 3 months at the latest, otherwise it will be damaged due to

self-discharge.  The battery is a wearing part and must be replaced after 4 years at the latest, or even

earlier, depending on the intensity of use.

Insert the mains plug

Fold up the cover (1).  Uncoil the mains cable (2) to the required length.  If necessary, loosen the Velcro® strap (3) 

beforehand.  Insert the mains plug (4) into a socket.

 2

 4

 1

 4

 3

1. Cover

2. Mains cable

3. Velcro strap

4. Mains plug

Содержание api OS1













































Отзывы:

Нет отзывов