manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 19 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 19

19

OS1 Mobile Operating Chair

Operating / Service Manual

 

OPERATION CONTINUED

4.3.6  Battery indicator

The regular indicator (14) on the hand control shows the current charge level of the quick-change battery.  

The indicator turns off when the chair is in stand-by mode.

TIP

 

Depending on the charging status of the quick-change battery, the control unit changes to stand-by either

after 120 minutes (charging status > 40%) or 10 minutes (charging status < 40%).  The corresponding 

operation control LED and the battery indicator on the hand control switch turns off.  A chair in stand-by

mode cannot be activated by the magnetic key (see Unlocking and locking the hand control).  Press any

button on the hand control to activate.  The current charge level is now displayed.

A green LED (left) and a yellow LED (right) in combination indicate the current charging level.  If the charge level 

is below 30%, a short beep will also sound when a button is pressed.  During charging, the two LEDs are flashing 

alternately.  The fully charged battery is indicated by the permanent lighting of the two LEDs.

The control unit distinguishes between the following charging levels:

Charge level 

Yellow LED (left) 

Green LED (right) 

Sound signal

   

100 - 50% 

on 

on 

        none

     49 - 30% 

on 

off 

        none

     < 30% 

         flashes 

off 

        short

During charging  

        alternate flashing 

        none

         Charging completed 

on 

on 

        none

NOTE

  If the battery falls below the 30% limit (yellow LED (left) flashes), the battery should be charged immediately

or replaced with a fully charged battery in order to achieve the best possible service life (see Charging the

battery).  When the charge level reaches the critical level, the control unit immediately deactivates all

movements.  There is a danger that the initiated movement cannot be finished or that the processor in the

control unit can no longer detect the position of the drives.

14. Battery indicator

14

Содержание api OS1













































Отзывы:

Нет отзывов