manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 39 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 39

39

OS1 Mobile Operating Chair

Operating / Service Manual

 

7.1  Initializing of actuators

If a signal sounds when the buttons on the hand control (see Hand control) are pressed to adjust the backrest, seat 

inclination or leg section, the control unit does not know the current position of the corresponding actuator.  In this 

case, you must move the affected actuator completely to the end position indicated below.  Do not press any other 

keys until the process is complete.

Carry out the initialization as follows

• Raise the backrest completely (3)

• Swivel the seat all the way down (6)

• Swivel the leg section all the way down (8)

The signal tone stops and the current position of the corresponding actuator is reinitialized.  The actuator is ready 

for operation again.

TIP

 

First bring the chair completely into the shock position (Trendelenburg position) (12) (see Shock position).

Immediately afterwards, move the chair completely to the basic position (11) (see Basic position) - safely

initializes any faulty actuator(s).  This procedure is only recommended for an occupied chair.

TROUBLESHOOTING CONTINUED

12

3. Backrest - up

6. Seat inclination - down

8. Leg section - down

11. Basic position

12. Shock position (Trendenlenburg position)

8

6

3

11

Содержание api OS1













































Отзывы:

Нет отзывов