manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 32 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 32

OS1 Mobile Operating Chair

Operating / Service Manual

 

32

OPERATION CONTINUED

CAUTION

 

Risk of falling or accident due to moving arm supports

  

Check that the arm supports have snapped in securely when they are completely pulled out by 

 

 

briefly supporting yourself on them.  Patients could slip and possibly fall.

 

•  When driving on slopes or inclines, e.g. ramps, a second user must additionally secure the chair at

 

   the front due to its weight and for the safety of the patient.

4.18  Infusion rod holder and infusion rod

The chair can also be equipped with an infusion rod holder and the infusion rod.

Swivel the infusion rod holder

The infusion rod holder (1) or the infusion rod (2) can be simply swivelled from left to right or in the opposite direction.  

The infusion rod holder sensitively snaps into the relevent end position.

CAUTION

 

Risk of trapping due to infusion rod

  

Never leave the infusion rod holder in an intermediate position.  When lowering the back, there is   

 

 

a risk of trapping between the infusion rod and the back cover.  The infusion rod will definitely be    

 

 

damaged.  The infusion rod holder may also be bent and will have to be repaired.  Intermediate

 

 

positions represent a danger and must therefore be avoided at all costs.  This also applies to chairs

 

 

that appear to be standing around unused.  Patients and third parties have no way of detecting

 

 

unsafe intermediate positions of the infusion rod holder and will face the resulting danger.

Inserting and adjusting the infusion rod

After inserting the infusion rod, tighten the handwheel (3) on the infusion rod holder.  Make sure that the infusion 

rod has also been pushed into the infusion rod holder as far as it will go.  The height of the infusion rod can be con-

tinuously adjusted.  To do this, loosen the clamping screw (4) on the infusion rod, hold the upper pull-out part of the 

infusion rod, while doing this, adjust the height as desired or required and retighten the clamping screw.

NOTE

  Do not use the infusion rod as a push handle - risk of damage (see Driving).

1.  Infusin rod holder

2.  Infusion rod

3.  Handwheel

4.  Clamping screw

 3

 4

 2

 1

Содержание api OS1













































Отзывы:

Нет отзывов