manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 29 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 29

29

OS1 Mobile Operating Chair

Operating / Service Manual

 

OPERATION CONTINUED

4.15  Braking

The chair has a braking system with central locking.  In order to allow the chair to move smoothly, the right front 

caster (marked yellow) can be locked in the direction of travel.  The electrical conductivity of the right front caster 

additionally prevents possible electrostatic charging of the chair.

Braking

To brake the chair, step down on the red side of one of the two pedals (1) completely.  When braked, the red side 

of both pedals points downwards.  All casters (2) are locked simultaneously.  Make sure that the chair cannot move 

on its own.

1.  Pedal

2.  Caster

 2

 1

Maneuvering

To release the brakes and bring the chair into the maneuvering position, step on the green side of one of the two 

pedals (1).  In the maneuvering position, both pedals are horizontal.  All casters (2) are released simultaneously.

TIP

 

In the maneuvering position, all casters are completely free to move.  This means that the chair can be

 

maneuvered in the tightest of spaces.

1.  Pedal

2.  Caster

 1

 2

Содержание api OS1













































Отзывы:

Нет отзывов