manualshive.com logo in svg

Jedmed api OS1, Руководство по эксплуатации и обслуживанию, Страница: 38 / 44

Поделиться
Скачать
Jedmed api OS1 Скачать руководство пользователя страница 38

OS1 Mobile Operating Chair

Operating / Service Manual

 

38

TROUBLESHOOTING

7  Troubleshooting

The chapter troubleshooting contains information about possible malfunctions that can be corrected by the user.

TIP

 

The use of specially trained and instructed service personnel is neither necessary nor intended for 

 troubleshooting.

Safety Instructions for Troubleshooting

DANGER

 

Fatal risk of electric shock

Under no circumstances may the user attempt to rectify faults in electrical components.

In the event of a defect, the chair must be disconnected from the mains.  Mark the chair as defective and separate 

it.  A new use may only take place after prior, proper repair by specialist personnel.

General troubleshooting tips

TIP

 

Before each troubleshooting, check whether the chair is connected to the mains (mains plug in a live socket).

Voltage test for everyone

At the appropriate mains outlet, perform a simple test with another functioning electrical device.  Device 

works when switched on - mains voltage is present.  Device does not function when switched on - no

mains voltage is present.

When the chair is connected to the mains and the hand control is enabled with the magnetic key, the green operation 

control LED (2) lights up to indicate that the chair is ready for operation (see Unlocking and locking the hand control).

Содержание api OS1













































Отзывы:

Нет отзывов