
OS1 Mobile Operating Chair
Operating / Service Manual
28
4.14 Driving
The chair may only be moved over a solid surface. Before moving the chair, it must be brought into the basic position
by pressing the yellow button (11) on the hand control (see Basic position).
• Manually fold in the foot support completely (see Foot support)
• Always hang the hand control on the backrest at the front end of the arm supports. The cable of the
hand control must not touch or run over the floor, as it is not resistant to being run over. If necessary,
the cable of the hand control must be wound up or hung up. Running over or crushing the hand control
cable will result in damage which can lead to malfunctions.
• If necessary, unplug the mains plug and wind the mains cable under the battery cover. Fasten the mains
plug or cable with a Velcro® strap. Fold down the cover and hold it firmly when lowering. Do not let
the cover fall freely and snap in under slight pressure (see Charging the battery).
Risk of electric shock / fire and malfunction
Make sure that the mains cable cannot be run over or damaged in any other way. The mains cable
must be wound up under the battery cover and fastened with a Velcro® strap, and must not touch
or run over the floor as it is not resistant to being run over. Running over or crushing the mains
cable will result in damage which can lead to electrical hazards and malfunctions.
• The arm supports must be brought into the normal position (completely pulled out) and engaged in the
highest position with a clearly audible noise (see Armrests).
• Do not use any existing infusion rod etc, as a push handle
• Additional attached or suspended objects must not cause any danger to the user or third parties.
Possible damage (e.g. to door frames etc.) must be avoided
• Do not drive faster than walking speed and slow down when turning corners and curves
• Drive carefully over obstacles on the ground, e.g. thresholds, and do not brake abruptly
• The use of stairs is strictly prohibited
• When driving on slopes or inclines, e.g. ramps, a second user must additionally secure the chair
at the front due to its weight.
The chair is equipped with four lockable casters. Move the right front roller into driving position and engage (see
Braking). All casters must be braked at all times when the chair is parked (see Braking).
OPERATION CONTINUED
Содержание api OS1
Страница 43: ...NOTES...