Jedmed api OS1 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 44

Jedmed api OS1 Скачать руководство пользователя страница 33

33

OS1 Mobile Operating Chair

Operating / Service Manual

5 Accessories

5.1 Double foot switch

The double foot switch allows the user to move the electric adjustment drives without using the hand control. The

alternative operation improves the ergonomics during important measure on the patient and avoids a possible con-

tamination of the hands. For handling the double foot switch (see Double foot switch).

NOTE

Observe the safety aspects when moving the electric acuators. Take particular care to check for possible

trapping points, both on the patient first and foremost, and with regard to the chair itself.

TIP

The non-slip double foot switch has an extra-long spiral

cable and thus allows plenty of freedom of movement.

The double foot switch and the spiral cable can be stowed

away safely when the chair is moved.

5.2 Headrest Ergo with Vario-double joint

The chair can be ordered with a headrest Ergo with Vario-double joint. For handling the headrest Ergo with Vario-dou-

ble joint (see Headrest).

TIP

The Vario-double joint allows a quick and very flexible

adjustment. Of course, a headrest Ergo with Vario-double

joint, in licorice, can be re-ordered at any time.

ACCESSORIES

«
...
31
32
33
34
35
...
»

Содержание api OS1













































Отзывы:

Нет отзывов