www.javad.com
www.javad.com
53
52
Collect
Stake
Final averaged
position of all
positions
Number of epochs used in final
position
Consistency Level
of the Point
Confidence Level
of the Point
Screen Anatomy - Map Screen
Screenshot after Phase-2 and Validation Phase of RTK Verification is Completed
HRMS and VRMS
of the Point in
units of 0.01 ft
Time between first
and last epoch in
seconds
Example One: Phase-2
Peak to peak distance
Horizontal Vertical
Current page’s linear units
Verify Statistics
# of Phase-1 Restarts, # of Groups
# of Epochs outside the Confidence Guard
during Phase-2
This Point was collected in a high multipath environment, several feet
away from a 2 story building. The effect of multipath can be seen with the
large vertical spread displayed in the vertical plot.
Screen Anatomy - Collect Action
Screen with Expanded User
Defined Buttons
The
User Defined Buttons
are expanded by pressing the
Action hardware button. The most commonly used and
recommend User Defined Button options are shown
below:
Many of the selected options are inputs for the same
parameters in the
Collect Prepare
screen. As with every
screen, more details can be found by pressing the
Help
hardware button.
Stake
Similar to the
Collect Prepare
screen in appearance
and function, the
Stake
Prepare
screen allows you
to configure the settings for
staking points.
Stake Prepare
Screen
Additionally, the
Prepare to Stake
screen allows you to
define various
Modes
to stake which include a
Points
Mode
,
several
Alignment Points Mode
and
Alignment Stake-Here
Mode
.
Sequence
defines the order of the points to be stake. The
From Map
mode is suggested mode for new users. This
allows you to pan the map cursor over a point displayed in
the map and tap
Next
to select that point to be staked.
Vertical Drift in mm per
minute (RMS of the
Vertical Drift)
