Janome Horizon Memory Craft 15000, Инструкция по эксплуатации

Страница: 59 / 184

B15 Darning
z
Attach the automatic buttonhole foot R and pull the
button holder all the way out.
z
x
c
q
0.9 cm
x
Start the machine and sew to the required length, then
press the reverse button. This sets the darning length.
Continue sewing until the machine stops automatically.
q
Required length
c
Sew another layer of darning over the first layer, at a
right angle to it.
NOTE:
The maximum darning length is 2 cm (3/4˝) and the
maximum width is 0.9 cm (3/8˝).
To sew the same size darning
When finished sewing, a confirmation message will
appear.
Simply start the machine to sew another layer of darning
stitches in the same size.
To sew the next layer of darning stitches in a different
size, press the X key.
To sew a shorter layer of darning stitches
Sew the first line to the desired length and stop the
machine.
Press the reverse button
w
and start the machine again.
The machine will sew the rest of the darning and stop
automatically.
To adjust the evenness of darning stitches:
You can correct unevenness of darning stitches by
pressing the “–” or “+” key in the adjusting window.
If the left corner is lower than the right side, press the “–”
key to correct it, and vice versa.
w
54