Janome Horizon Memory Craft 15000, Инструкция по эксплуатации

Страница: 54 / 184

Step-3
Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Then press the reverse button
q
.
Step-4
Start sewing again, and machine sews the back bartack
and locking stitches then stops automatically with the
needle in the up position.
When the buttonhole is finished, a message will appear.
To make the next buttonhole, position the fabric and start
sewing again. The message disappears and the machine
sews another buttonhole identical to the first one then
stops automatically.
To sew another buttonhole in a different size press the X
key.
NOTE:
To cut the buttonhole opening, refer to the instructions
on page 45.
The memorized length will be cancelled if the presser
foot is raised or the startover key is pressed before
buttonhole is completed.
q
49