Janome Horizon Memory Craft 15000, Инструкция по эксплуатации

Страница: 58 / 184

Cut the filler cord at both ends as close to the buttonhole
as possible.
NOTE:
Do not adjust the opening width wider than 0.8.
Set the stitch width in accordance with the thickness
of the cord used.
To cut the buttonhole opening, refer to the instructions
on page 45.
Corded Buttonhole
To sew a corded buttonhole, follow the same procedure
as for B1 square (sensor) buttonhole.
Select pattern B1.
Place the button on the button holder on the buttonhole
foot.
Hook a filler cord on the spur on the front of the foot.
Bring the ends of cord toward the back and under the
foot.
Bring up the ends of the cord and insert both ends
between the ribs and metal plate.
q
Spur
w
Metal plate
Set the stabilizer plate as necessary and attach the
buttonhole foot.
Specialty Stitches
B14 Button Sewing
See page 85 for sewing instructions.
q
w
Lower the needle into the fabric where the buttonhole will
start.
Lower the foot and buttonhole lever.
Pull the needle thread lightly to the left.
Start the machine to sew the buttonhole over the cord.
The machine stops automatically when finished.
Remove the fabric from the machine and cut the sewing
threads only.
53