Janome Horizon Memory Craft 15000, Инструкция по эксплуатации

Страница: 74 / 184

Reducing the size of letters
To reduce the height of a character to approximately 2/3
of its original size, select the character and press the
letter case key “S”
q
.
Spacing
To enter a space in monogramming, press one of
the three space keys on the lower right corner of the
monogram selection.
q
Space keys
w
Small-size space
e
Medium-size space
r
Large-size space
Manual thread tension
This machine is equipped with automatic thread tension
control. However, you may need to manually adjust the
tension balance depending on the sewing conditions.
To adjust the thread tension, press the setting bar to
show the option.
Individual thread tension adjustment
To apply the thread tension adjustment to each letter
individually, select the letter by moving the cursor.
The selected character will be displayed at the upper left
corner
q
when the setting bar is pressed.
Press “+” or “–” to adjust the thread tension of the
selected letter. The adjusted thread tension is applied to
the selected letter.
Unified thread tension adjustment
To apply the thread tension adjustment to all letters
together, you do not need to select the letters.
Press the unified thread tension key
w
.
Press “+” or “–” to adjust the thread tension.
The adjusted thread tension is applied to all entered
letters.
When unified thread tension control is applied, the unified
thread tension key turns to black.
Press the unified thread tension key again to deactivate
the unified thread tension adjustment.
NOTE:
Unified thread tension adjustment can be applied
to the monogram patterns such as Block, Script,
Broadway and Block (9 mm) only.
w
q
w e r
A
2/3
A
q
q
69