Janome Horizon Memory Craft 15000, Инструкция по эксплуатации

Страница: 103 / 184

o
Cloth Guide
Calibration of the default position
The default position of the cloth guide is 15 mm (5/8˝)
from the center needle drop position. However, you can
fine tune the default position of the cloth guide.
Press the Yes key and a warning message will appear.
Press the OK key and the carriage will move to the
standard position.
NOTE:
The embroidery unit must be attached when
calibrating.
i
o
i
Adjustable Start-Up Speed
The machine will start running slowly and the sewing
speed will gradually increase to maximum. You can
select the desired start-up speed from slow, normal or
high by pressing the corresponding key, and set the
speed for the start/stop button or foot control individually.
Press the key or key to adjust the position of the
cloth guide.
Press the OK key. The message is displayed and the
carriage will return to the home position.
Saving favorite positions
If you have set the cloth guide to your favorite position, 6.4
mm (1/4˝) in the manual setting window for example (refer
to page 40), you can save this position for future use.
To save favorite positions, press the ON/OFF key to turn
ON the save position option.
Press the next page key to show the next menu.
98