Jands Vista I3, Руководство пользователя

Страница: 167 / 308

SmartFX Effect controls
This option… does this…
Spread Vista dyna
value for ea
•
•
Overlap con
nothing.
Overlap &
mically calculates a waveform offset
ch fixture depending upon this control:
Spread = 0% - all fixtures have a uniform offset
Spread = 100% each fixture has a unique offset
ranging from 0% to 100%.
Normally this control will be left at 100% unless the
trol is at 100%, otherwise there will be
periods when all fixtures will appear to be doing
See below for a simple SmartFX tutorial using
Spread.
Sort Fixtures when an effect runs you can sort the fixtures in a
number of ways:
•
ID sorts the fixtures by number order.
sorts based on the order in which you
selected them in the Chooser.
n
’
•
Selection
•
Random sorts the fixtures in a random order.
•
Position sorts the fixtures by their position on
the Fixture Chooser layout. Fixtures are sorted
from top left to bottom right.
To reverse the sort order click on the drop dow
box and choose either ‘Ascending’ or ‘Descending
Spread Shape
es
st to last. The effect starts on the first fixture
•
Pairs, outside to inside. The effect starts on the
the spread shape buttons control how the effect
runs across the fixtures. There are 4 spread shap
available:
•
Fir
and runs to the last.
2 end fixtures and into the centre.
•
Last to first. The opposite of 1.
•
Pairs, inside to outside. The opposite of 3.
Curve
this
xtures are evenly distributed. Other
others out.
sets the distribution of fixtures, along the effect
waveform. The normal setting is ‘Linear’and in
case the fi
curves, such as square and inverse square will
bunch some of the fixtures together and spread
Vista User Guide, Version 2 7 ‐ 9