Jands Vista I3, Руководство пользователя

Страница: 244 / 308

Troubleshooting Appendix 4 – tracking backup
Troubleshooting
If you cannot see your slave console on the Network tab of th
Check all your Ethernet cables and connections.
If you are using a computer turn off any firewall or port blocking
application.
Check that the Group name is exactly the
system.
Check that both the master and slave have IP addr
subnet. An IP address consists of four number
192.168.0.1) The numbers for the master and slav
same except for the last number, which must be different an
254.
On your Vista T or I series you can check the IP
Network window from the File menu.
e backup window:
1.
2.
3.
same on all devices in your backup
4.
esses that are on the same
s separated by dots (i.e.
e should be exactly the
d between 1 and
5.
by opening the Settings
.
On a Windows PC you can find the IP address from the command prompt
7.
ork Interface is active. Having both
aster to the Slave and vice versa.
and prompt
xxx.xxx.xxx.xxx) – where
er device in your system.
ou are using.
erved for use on private networks
Ps on a small network it’s best to use
10.0.
172.16.0.0 - 172.31.255.255
. 5
6
(Start > Run > type: cmd) and type: ipconfig).
On a Mac make sure that only one Netw
the wired (Ethernet) and wireless (Airport) interface active may cause
tracking backup to fail.
8.
Check that you can ‘Ping’ from the M
9.
On a Windows PC you can Ping another device from the comm
(Start > Run > type: cmd) and type: ping
xxx.xxx.xxx.xxx is the IP number of anoth
10.
Power down and re-start the console(s) and computer(s) y
Private IP addresses
Three blocks of the IP address space are res
(local area networks). When setting static I
IPs from one of these ranges:
0.0 - 10.255.255.255
192 168.0.0 - 192.168.255.25
17 ‐ 30 Vista User Guide, Version 2