Jands Vista I3, Руководство пользователя

Страница: 163 / 308

SmartFX Effect controls
T (s) for ‘W
Effects can include one or more feature types (IPCGBG). Vista creates a feature
tab for each type with con
d
direction.
he Feature tab ave’ effects
trols for the effect waveform, size, rate multiplier, an
Click on the feature tab (i he controls:
Â
ure tab(s) wi e.
This option…
.e. Intensity) to see t
The feat ll not appear unless the effect is selected in the left pan
does this…
Size
(was Amplitude)
to size 50%, on a set of
fixtures they will modulate between 0 and 50%
intensity.
For effects that run on more than one channel (i.e.
Position and Colour mix) there is a separate size
control for each channel
For swing effects there is no size controls since only a
value of 100% will reach the endpoints.
Size affects how much of the effect waveform is
added to the feature. For example if you run an
Intensity wave effect, set
Rate
(was Rate Multiplier) To maintain synchronization between the features of
an effect you can scale the rate for each feature as a
multiple of the base rate.
To make a feature run slower than the base rate set
the feature rate to lower value (e.g. x½ or x¼ ).To
make a feature run faster than the base rate set the
feature rate to a higher value (e.g. x2 or x4 )
Direction Mainly useful for chasing effects, this controls
whether fixtures are sequenced in ascending
(forward), descending (backward) or both directions
(bounce).
Vista User Guide, Version 2 7 ‐ 5