Jands Vista I3, Руководство пользователя

Страница: 137 / 308

Working with cuelists Creating a Move in Black cue
2.
To adjust a feature type fade time click on the on the end point of the bar and
a double arrow drag to increase or decrease the
)s mark. Or
4.
and select from the
drop down list
when the cursor changes to
time. Or type a value in the corresponding ‘Time’ box.
3.
To adjust a feature type delay time click on the bar and when the cursor
changes to a hand drag to move the bar so that it starts after the
type a value in the corresponding ‘Delay’ box.
To adjust a feature type fade curve click on the fade icon
This icon… does this…
Sets the curve to a normal linear fade. The feature fades
evenly from the old setting to the new setting over time.
Linear
The fade is slower at the start
Damp
The feature goes to the end state very quickly.
Snap start
Snap end
time.
The feature doesn’t change until the very end of the fade
Square law
The feature starts with a delay, then slides up to the end
state.
The feature starts quickly and the finishs slowly.
Inverse square la
Switch
The feature goes to the end state very quickly.
The feature
Hot power
goes to the end state very quickly.
Flourescent
Vista User Guide, Version 2 6 ‐ 31