JAI SP-20000M-PMCL Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 118

background image

SP-20000M-PMCL / SP-20000C-PMCL

- 6 -

Before using this camera

EMVA 1288

With  regard  to  signal-to-noise  ratio  in  this  manual,  specifications  measured  by  EMVA  1288  are  used
together with specifications by a traditional measurement method.

EMVA 1288 is  a more complete measurement that considers multiple noise sources, including random
noise,  pattern  noise,  and  shading.  Additionally,  EMVA  1288  incorporates  temporal  variances  in  pixel
output by capturing 100  frames of data and computing the RMS variations over the captured frames.
Because  of  the  comprehensive  nature  of  the  noise  analysis  and  the  additional  consideration  for  RMS
variances  over  time,  EMVA  1288  SNR  measurements  are  inherently  lower  than  the  traditional  SNR
measurements given by manufacturers. However, the comprehensive nature combined  with rigid test
parameters, means that all manufacturers’ are measuring their products equally and EMVA 1288 tested
parameters can be compared among different manufacturers’ products.

In order to learn more about EMVA 1288, please visit http://www.emva.org

Frame grabber board

The SP-20000M-PMCL and SP-20000C-PMCL comply with “Power over Camera Link” which enables power
to be supplied to the camera through the Camera Link cable(s). Because the power requirements of the
camera exceed the amount of power which can be provided over a single PoCL connection, power must
be supplied via both Camera Link cables in order to utilize the PoCL capabilities. If you plan to use this
function, please be sure that the frame grabber board you are using also complies with this specification.
Alternatively, the camera can be powered via a separate power supply connected to the 12-pin Hirose
connector.

The SP-20000M-PMCL and SP-20000C-PMCL employ output formats which comply with the GenICam

Ⓡ

standard. They are 1X8-1Y (8-Tap output), 1X4–1Y (4-Tap output) and 1X2–1Y (2-Tap output).

1X8–1Y,

1X4-1Y and 1X2–1Y are available for 8-bit and 10-bit. Please check if the frame grabber used in the
system complies with the mentioned formats.

Computer used for SP-20000 series

In order to get proper performance from this camera, it is necessary to use a PC equipped with a PCIe
2.0 slot with a size and capacity of 16 lanes or higher (x16 or x32).

Camera control tool

The SP-20000M-PMCL and SP-20000C-PMCL are designed to use the JAI SDK and Control Tool software to
control camera functions. All controllable functions are stored in the camera’s XML file. The JAI SDK can
be downloaded from

www.jai.com .

A camera control tool for using the Short ASCII command protocol is not available on the JAI website.

Please contact your local JAI representative if this is required.

«
...
6
7
8
9
10
...
»

Содержание SP-20000M-PMCL























































































































Отзывы:

Нет отзывов

Похожие инструкции для SP-20000M-PMCL

Бренд: D-Link Страницы: 72

Бренд: D-Link Страницы: 73

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 67

Бренд: D-Link Страницы: 24

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 2

DCS-2121 - SECURICAM Network Camera

Бренд: D-Link Страницы: 68

DCS-1110 - Network Camera

Бренд: D-Link Страницы: 16

Бренд: Idis Страницы: 26

Бренд: Idis Страницы: 40

Бренд: Idis Страницы: 45

Бренд: Idis Страницы: 12

Бренд: Idis Страницы: 58

Бренд: Idis Страницы: 48

Бренд: Idis Страницы: 20

Бренд: Idis Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды