Jacobsen Eclipse 322, Руководство по ремонту

Страница: 150 / 336

4-76 4222983 Second Edition
ELECTRICAL
4
Reel Motor Amps
See Figure 4-51.
Figure 4-51
Cycle through the LCD menu until the reel motor current
screen is displayed. When in this mode two digits are
displayed as zeros for the left, center, and right reel
motors. When the reels are activated, the display will
indicate the amount of current drawn by each reel motor
or just the reel that is enabled.
Compare the three reel motor readings; if one reel motor
has a higher current draw than the others, this may
indicate a mechanical problem or a faulty reel motor.
If the current in one of the reel motors is 35 amps or more
for more than 30 seconds, the following will occur:
• The LCD sounds the alarm and turns on the fault
LED.
• Diagnostic fault code is displayed for the faulty reel.
(See “DTC: Left Reel Overcurrent” on page 4-98.)
(See “DTC: Center Reel Overcurrent” on page 4-98.)
(See “DTC: Right Reel Overcurrent” on page 4-99.)
Reel Motor Speed
See Figure 4-52.
Figure 4-52
Cycle through the LCD menu until the reel motor speed
screen is displayed. When the reels are activated, the
display will indicate the speed of each reel motor.
Compare the three reel motor readings; the three reel
motors must be operating within 50 rpm of each other.
If the speed of one of the reel motors is 200 rpm or less
for more than 30 seconds, the following will occur:
• The LCD sounds the alarm and turns on the fault
LED.
Diagnostic fault code is displayed for the faulty reel. (See
“DTC: Check Left Reel” on page 4-100.) (See “DTC:
Check Center Reel” on page 4-100.) (See “DTC: Check
Right Reel” on page 4-101.)
1 Left Reel Motor Amps 3 Center Reel Motor Amps
2 Right Reel Motor Amps
00 REEL 00
00 AMPS
TN2772
1
3
2
1 Left Reel Motor RPM 3 Center Reel Motor RPM
2 Right Reel Motor RPM
1900 REEL 1900
1900 RPM
TN2773
1
3
2