NOTICE:
The mechanical seal used in the standard design is not resistant to mineral oils.
NOTICE:
For further details about mechanical seals, as well as the dangers of accidents, connected to
them refer to Monitoring and Mechanical seals.
Shaft sealing
Two shaft sealing variants are available. On the data sheet and / or the order confirmation the kind of
shaft sealing is given. An instruction for the mounting and operation of mechanical seals is contained in
the particular "Mounting Instruction of Shaft Sealing".
For nominal size (d1) of the mechanical seal refer to following chart.
Type
Nominal size d1
of mechanical
seal
Type
Nominal size d1
of mechanical
seal
40-25-160
33
100-65-160
43
40-25-200
33
100-65-200
43
40-25-250
43
100-65-250
43
50-32-160
33
100-65-315
53
50-32-200
33
125-80-160
43
50-32-250
43
125-80-200
43
50-32-315
43
125-80-250
43
65-40-160
33
125-80-315
53
65-40-200
33
125-100-200
43
65-40-250
43
125-100-250
53
65-40-315
43
125-100-315
53
80-50-160
33
150-125-250
53
80-50-200
33
150-125-315
53
80-50-250
43
200-150-250
53
80-50-315
43
Bearing
The shaft is guided by the ball bearings of the motor. The bearings are grease lubricated for life and,
therefore maintenance-free.
4.1 Product Description
18
ICB Installation, Operation and Maintenance Instruction
Содержание Goulds Pumps ICB
Страница 1: ...Installation Operation and Maintenance Instruction ICB ...
Страница 2: ......
