Iseki TJ75, Руководство по эксплуатации

Страница: 46 / 117

OPERATION
45
PTO Operating Control
FIG. 5-17: To select rear PTO - Make sure PTO control
switch is OFF and then move rear PTO selector lever, 2,
engage gear set, 4, inside rear housing.
To engage PTO - Turn PTO switch, clockwise and then
pull up to actuate hydraulic clutch, 5, and complete the
drive. The indicator light in the warning light strip will
come on, showing PTO clutch is engaged.
To disengage PTO - Push PTO switch, 1, to release
hydraulic clutch, 5.
When further use of rear PTO is not required, depress
clutch pedal and return rear PTO selector lever, 2, to
neutral.
NOTE: PTO can be engaged/disengaged by PTO
switch, 1, independently of main clutch. Reduce
engine rpm prior to engaging (switching on)
and disengaging (switching off) PTO.Always
move PTO switch to OFF before shifting PTO
selector lever.
FIG. 5-16
3 5
4
FIG. 5-17
1 6
FIG. 5-18
2