Iseki TJ75, Руководство по эксплуатации

Страница: 11 / 117

TJ75
10
SPECIFICATIONS OF THE RAMPS
Length
More than 4 times the height of the platform of the truck
Width (effective width) more than 3cm
Capacity (one ramp) more than 2200kg
Ramps should have anti-skid surfaces
() Hook the ramps securely on the platform of the trac
tor with the top of the ramp level with the platform.
() Always prepare for even the worst, by never
allowing other persons near the tractor.
(10) Drive the tractor carefully at the moment the tractor
moves from the ramps onto the platform, for it
changes angle abruptly.
DURING OPERATION
(1) During operation, never allow other persons in the
vicinity of the tractor, because the tractor itself or
flung pieces may cause injury.
(2) Pay attention to safety around the tractor to
avoid injury to bystanders or damage to property.
Especially when operating with other persons, use
the horn to warn them.
(3) When crossing a ditch or a levee or when passing
through soft land, drive the tractor slowly and
straight so that it dose not slip or turn over.
(4) Do not touch dangerous parts such as rotating
parts, moving parts, hot parts (muffler, radiator, or
engine, etc.), or electric parts (battery terminals and
other live parts), or you may be injured seriously.
() If you use a trailer, use a proper one which suits
your tractor. Using an improper trailer may cause
serious accidents. Never attempt to haul beyond
the tractor`s capacity. If you have a question, please
consult ISEKI dealer.
FIG. 1-16
FIG. 1-17
FIG. 1-18
FIG. 1-19