Iseki TJ75, Руководство по эксплуатации

Страница: 12 / 117

SAFETY
11
() When moving the machine toward an implement
for the purpose if installing the implement, never
allow any one to stand in between. When installing
the implement on the machine, be prepare to
move away promptly in the event of an emergency.
The brakes should be applied securely during
installation.
INSPECTION AND MAINTENANCE
(1) When servicing the tractor or mounting or dismount-
ing an implement, place the tractor on level,
hard ground which is sufficiently illuminated, or
unexpected accidents may occur.
(2) When servicing the tractor, follow the instructions
listed below:
・
Stop the engine.
・
Apply parking brakes.
・
Disengage all PTO.
・
Place all gear shift levers in neutral.
・
Remove the starter key.
・
Lower the implement fully, if equipped.
If not, your hands or clothes may be caught or
sandwiched between.
(3) When servicing the tractor, use proper tools.
Using makeshift tools may lead to injuries or poor
servicing, which may result in unexpected accidents
during operation.
(4) The engine, muffler, radiator, etc. are very hot
just after operation, so wait until they cool down
sufficiently to avoid burns.
() Never remove the radiator cap while the engine is
hot or running. Wait until the engine cools down and
then relieve the radiator pressure by releasing the
radiator cap. Carelessly pouring cooling water into
the heated radiator can cause serious damage to
the radiator and the engine. Careless removal of
the radiator cap can cause serious injury because
of overheated water vapour.
() Never fit unauthorized implements or attempt unau-
thorized modification.
() Be sure to reinstall the removed safety covers in
place as exposed dangerous parts may cause seri-
ous injury.
() Avoid high-pressure fluids. Escaping fluid under pres-
sure can penetrate the skin and cause serious injury, so
keep hands and body away from pin holes and nozzles
ejecting such fluids. Be sure to consult your dealer
about the hydraulic and fuel injection system trouble.
When checking for leaks, use a piece of cardboard
or wood without fail. If any hydraulic fluid is injected
accidentally into the skin, it must be removed within a
few hours by a doctor familiar with this type or injury.
FIG. 1-20
FIG. 1-21