Iseki TJ75, Руководство по эксплуатации

Страница: 94 / 117

LUBRICATION & PERIODIC MAINTENANCE
93
Steering Free-Play
FIG. 6-48: Steering should be checked for excessive
looseness, as indicated by steering wheel free- play.
Maximum free-play is approximately 1.25-2.50" (30-60
mm) when measured at outside of steering wheel rim.
Excessive free-play can be caused by:
・
Loose or worn ball joints
・
Worn or damaged steering column shaft/universal
joints
・
Worn or damaged power steering unit
CAUTION: Excessive steering free-play
must be corrected before use. Contact your
Dealer.
Front Axle End-Float
FIG. 6-49: Fore and aft play of front drive axle, 1, in its
supports should be 0.004-0.012" (0.1-0.3 mm). End-float
is measured with axle raised off ground.
Loosen lock nut, 2, and turn adjusting bolt, 3, as needed
to achieve correct measurement. Tighten lock nut.
NOTE: Excessive end-float will cause noise. This noise
will be more pronounced when using 4-WD.
TORQUE CHART
FIG. 6-50: All fasteners should be tightened in
accordance with torque chart unless a specific torque
value is called out in relevant maintenance information.
FIG. 6-48
30〜60mm
FIG. 6-49
3
2
1
FIG. 6-50