Iseki TJ75, Руководство по эксплуатации

Страница: 41 / 117

TJ75
40
GROUND SPEED SELECTION
Tractor is equipped to provide twelve forward gear
speeds and twelve reverse gear speeds.
FIG. 5-4: Gear shift button, 1, provides four gear
selections. These gear selections are compounded
by range shift lever, 2. The range shift lever provides
three major changes in ground speed. Gear shift button
provides smaller ground speed changes.
FIG. 5-5:
Depress clutch pedal and position shift levers
in desired positions. Depress brake pedals to release
parking brake lock and then slowly release clutch pedal.
Should another transmission gear be desired:
Gear Shift Button-Push gear shift button to select the
desired speed and continue with operation.
+: Push gear shift ) to increase the traveling
speed.
-: Push gear shift button(-) to reduce the traveling
speed.
NOTE: Gear shift buttons are not available when
shifting range gear in neutral position.When
starting engine, set 1st gear in gear speed
selection automatically.
IMPORTANT: Depress clutch and stop Tractor before
all range lever shifts.
CAUTION: Do not use gear shift button
when loading or unloading the tractor on/
off a truck. Drive the tractor slowly and
carefully at the moment the tractor moves
from ramps onto the level platform.
Do not use gear shift button when traveling
on steep slope. Make engine speed low
before pushing the gear shift button.
Otherwise it may cause front-tire lift up or
tractor turnover.
FIG. 5-4
2
1
FIG. 5-5