Iseki TJ75 Скачать руководство пользователя страница 76

Страница: 76 / 117

LUBRICATION & PERIODIC MAINTENANCE

Removing/Reinstalling Side Cover

FIG. 6-2:

The side cover, 1, can be removed by pulling

up the bottom of side cover for this side and lift up the

side cover after pulling the knobs, 2, and unlocking the

hooks.

When reinstalling the side cover, push the bottom of the

side cover and lock the knobs, 2, surely after inserting

the two hooks on the top of the side cover into the two

holes of the hood.

Removing/Reinstalling Front Grille

FIG. 6-3:

The front grille, 1, can be opened by pulling

out the top of the front grille, 1, slightly with turning the

knob, 2, clockwise on the hood.

Disconnect the two couplers of head lamps and the

coupler of the horn.

Remove the wire, 3, from the pin of the front grille.

After lifting up the front grille, 1, slightly and pulling out

the bottom of the front grille, 1, remove it to forward.

When reinstalling, do in the reverse way.

FIG. 6-2

FIG. 6-3

Содержание TJ75






















































































































Результаты поиска

Содержание TJ75

Отзывы:

Iseki TJ75, Руководство по эксплуатации, Страница: 76 / 117

Результаты поиска

Содержание TJ75

Отзывы: