Iseki TJ75, Руководство по эксплуатации

Страница: 29 / 117

TJ75
28
FIG. 4-13: Turn/hazard indicator lights, 13 and 14
Power Take-Off (PTO) Switch
FIG. 4-14 & 4-15: PTO switch, 1, is used to engage and
disengage the PTO drive system.
The switch must first be turned to right and then pulled
up to engage PTO. When engaged, the PTO indicator
light in the indicator light strip will illuminate.
A PTO select switch, 2, is used to adjust PTO clutch
modulation.
Push on: soft start (button depressed and illuminated)
- for high inertia loads
Push off: standard start (button out and not illuminated)
IMPORTANT: PTO switch is equipped with a lock-out
to prevent accidental engagement of
PTO system. To engage PTO, first turn
switch clockwise and then pull up it. DO
NOT FORCE SWITCH.
NOTE: PTO switch, 1, must be used in conjunction
with rear PTO selector lever, to lower left of
operator's seat, when rear PTO is used. Refer
to operationsection for complete details.
When PTO switch is ON, the engine cannot be
started. Always switch off PTO and depress
main clutch pedal to start engine.
WARNING: Always shut off PTO and shut off
Tractor engine before servicing PTO-driven
implement. Allow all movement and motion
to stop before leaving operator's seat.
FIG. 4-13
14 13
FIG. 4-14
FIG. 4-15