Iseki TJ75, Руководство по эксплуатации

Страница: 35 / 117

TJ75
34
THREE-POINT HITCH
Complete operating instructions for three-point hitch are
given in operation section of this book.
Control Lever
FIG. 4-28: Position control lever, 1, adjusts the height
of three-point hitch on the rear of Tractor. Setting lever
in a particular position will set the height respectively.
Full up position is with lever fully rearward and full down
position is with lever completely forward.
CAUTION: use position control lever, 1,
when attaching or detaching implements.
NOTE: When starting engine, ensure implement is
low- ered to the ground and the lever are fully
forward. This reduces load on starter due to
hitch trying to raise when engine is cranked.
Lowering Rate Control Knob
FIG. 4-29: Lowering rate knob, 1, adjusts rate of dropof
three-point hitch and implement. Turning knob clockwise
will increase lowering time and counterclockwise will
decrease lowering time. Turning knob fully clockwise will
lock implement (or hitch) in raised position for transport.
CAUTION: When working near or under
mounted equipment, securely block in
position and turn lowering rate clockwise to
stop.
FIG. 4-28
1
FIG. 4-29
1