Vestil HDC-900, Руководство пользователя

Страница: 1 / 18

Vestil Manufacturing Corporation
2999 North Wayne Street, P.O. Box 507
Angola, Indiana 46703 USA
Phone (260) 665-7586 • Fax (260) 665-1339
sales@vestil.com • www.vestil.com
Revised
07
-
1
3
A company dedicated to solving ergonomic and material
handling problems since 1955
.
OWNER'S
MANUAL
HYDRAULIC DRUM CRUSHER/COMPACTOR
MODEL
S
HDC-900
& HDC-905
WARNINGS & SAFETY INSTRUCTIONS
Read owner's manual completely before operating unit!
•
Do not service unit unless power is disconnected.
• Do not operate drum crusher/compactor unless all cover
plates are in place and all components are in proper working
order.
• Do not clean out drum crusher unless power is
disconnected.
• Do not bypass the safety interlocks.
• Keep hands and feet outside the unit at all times when
operating.
• Do not allow personnel to stand on drum crusher.
• Do not stand in front of drum crusher door.
• Do not operate this unit with loading door open. **(Do not
operate if safety switch is not functioning properly.)
• Do not change pressure relief valve setting.
• Do not clamp hydraulic cylinder in a vise as you may distort
the drum.
• Use only maintenance parts either supplied or approved by
the manufacturer.
•
DO NOT modify the drum crusher in any way without first
obtaining written authorization from VESTIL.
Unauthorized modification(s) automatically void the
Limited Warranty and might make the crusher unsafe to
use.
•
Do not use brake fluids or jack oils. Use AW-32 Hydraulic
oil or equal.
• Report all safety problems immediately.
•
Make sure all labels ( see
Label placement diagram, p. 12
)
and machine guards are in place & readable or functioning.
HYDRAULIC DRUM CRUSHER/COMPACTOR
MODEL
S
HDC-900
& HDC-905
Contents
Warnings and Safety Instructions ..................... 1
Receiving Instructions ...................................... 1
Warnings and Safety Instructions ..................... 2
Operating Instructions ...................................... 3
Installation Instructions ..................................... 4
Loading Instructions ......................................... 4
Periodic Maintenance Instructions ................... 5
Exploded Parts Drawing
s
....................... 6
A & 6B
Bills of Materials
..................................
.
.. 6
A & 6B
Power
U
nit
: D iagram & P arts L ist
.........7
A-7B
Pressure S witch & V alve S ettings
..........7
C-7E
Electrical
Circuit Diagram
............................. 8
Electrical
Syste
m
Specifications
................... 9
Hydraulic
Circuit Diagram
........................... 10
Label Placement Diagram
.
.............
............ 11
Limited Warranty (Standard Units)
.........
..
12
A
Limited Warranty
(Wash-down Units)
.......
.
1
2B
RECEIVING INSTRUCTIONS
After delivery, IMMEDIATELY remove the packaging
from the product in a manner that preserves the
packaging and maintains the orientation of the product
in the packaging; then inspect the product closely to
determine whether it sustained damage during
transport. If damage is discovered during the
inspection, immediately record a complete description
of the damage on the bill of lading. If the product is
undamaged, discard the packaging.
SERIAL NUMBER AND CAPACITY
The serial number and capacity are inscribed on the
nameplate ( See p. 12 for location). Please remember to
include these numbers in any correspondence with your
dealer or the factory.
E
N
G
L
I
S
H
E
S
P
A
N
O
L
F
R
A
N
Ç
A
I
S
Page 1