5
1. GENERAL DOCUMENTATION
1.1. GENERAL WARNINGS
1.2. PREAMBLE
1.3. TRANSPORT AND HANDLING
•
•
•
•
•
•
•
The present manual is an integral part of the product.
It supplies all of the necessary conditions for correct
installation, use and maintenance of the machine.
The user is obliged to read this manual carefully and
to refer to it always. It must be kept in a known place,
accessible to all authorised operators (installer, user,
maintenance technician).
The blast chiller is intended for professional use.
Therefore only qualified personnel can use it.
The blast chiller is destined to be used only for that
for which it was designed.
The Blast Chiller shall not be installed and utilized in an
explosive environment (presence of explosive powder
or gas)
The manufacturer declines all liability for damage
caused by improper and unreasonable use, such as:
- improper use by untrained personnel.
- modifications or interventions not specifically for the
model.
- use of non-original spare parts or parts not specifically
for the model.
- lack of compliance, even partial, with the instructions
in this manual.
Installation must be carried out by authorised and
specialised staff, respecting the instructions in this
manual. The manufacturer declares and assigns a
Declaration of Conformity to the 2006/42, Machinery
D i r e c t i v e , t o t h e 2 0 1 4 / 3 5 / U E D i r e c t i v e a n d t o t h e
2014/30/UE. Directive to each individual machine
In compliance with directive 97/23/EC, based on the
model the equipment is supplied together with the user
manuals and declarations of conformity of the:
• safety valve;
• liquid receiver;
• liquid separator;
• liquid re separator;
• compressors
• oil separator;
• safety pressure switches.
The joints made by IRINOX S.p.a. comply with the
standard EN14276-2
IMPORTANT NOTE:
IRINOX reminds you that all the
machines must undergo periodical inspections in
compliance with national standards in force.
•
Loading and unloading the appliance from the trans-
portation vehicle can be performed with a forklift
truck or pallet mover. The forks must be longer than
half the length of the appliance. The lifting device
must be chosen suitably, based on the dimensions
and mass of the packagedmachine, indicated on the
packaging labels.
All due precautions must be taken to handle the appli-
ance in order not to damage it, respecting the indica-
tions on the packaging.
1.4. UNPACKING
Remove the cardboard, wooden or crate packaging
upon which the blast chiller is placed. Lift the blast
chiller with a suitable means (lift truck), remove the
wooden base and position the machine in the intended
area (see par. 2.2).
After having removed the packaging, make sure that
the blast chiller is intact.
Remove the protective PVC film from all sides (Fig.1).
Use protective gloves to handle the packagin-
gand wooden base.
N.B.: all of the various packaging components must
be disposed of according to the Standards in force in
the Country where the appliance is used. In no case
must anything be dispersed into the environment.
•
•
•
Fig. 1
Содержание ICY L
Страница 35: ......
